Complete Haier Hydro All-In-One R290 8 kW single-phase air/water heat pump package with integrated 200 L hot water tank, designed to provide heating, cooling, and domestic hot water in a compact, high-performance solution.
This Haier solution combines an 8 kW R290 outdoor unit with an All-In-One indoor unit featuring a built-in 200-litre hot water tank, as well as the main hydraulic components required for the system to operate.
An all-in-one solution for heating and domestic hot water
The Haier Hydro All-In-One R290 8 kW is an air/water heat pump designed to meet the heating and domestic hot water needs of residential buildings.
Its Hydro All-In-One design combines the AW082HUGHA outdoor unit with the HU102F20AHYA indoor unit. The latter features a 200-litre hot water tank and several hydraulic components, reducing the space required and simplifying installation.
The system uses natural R290 refrigerant and features Inverter technology, allowing the heat pump to adapt its operation to the building's needs.
Key features of the Haier Hydro All-In-One 8 kW
-
8 kW nominal heating capacity
-
200-litre hot water tank integrated into the indoor unit
-
Compact and comprehensive Hydro All-In-One technology
-
R290 refrigerant, natural and with a very low global warming potential
-
Inverter technology to adapt the power output to the needs
-
Energy class A+++ for heating at 35 °C and 55 °C
-
COP up to 5.35 at 7 °C outdoor temperature and 35 °C water temperature
-
SCOP up to 5.20 at low temperature
- Water production up to 80 °C, depending on operating conditions
- Heating operation down to -25 °C, depending on manufacturer conditions
- 230 V / 50 Hz single-phase power supply
- Reversible operation with heating and cooling
- Temperature control via outdoor reset
- Ability to manage two zones of heating or cooling
R290 Hydro All-In-One technology
The All-In-One design is one of the main advantages of this Haier range. The indoor module houses several components required for the system's hydraulic operation in a single column.
The 200-litre hot water tank is built directly into the indoor unit. The system also includes the main hydraulic components, including the expansion vessel, circulation pump, and flow sensor.
This design reduces the number of separate pieces of equipment to install and helps create a more compact installation.
Please note: the 200-litre hot water tank is an integral part of the Haier HU102F20AHYA indoor unit. It is not an external hot water heater that needs to be installed separately.
Heating performance
Heating capacity at 7 °C outdoor / 35 °C water temperature: 8.00 kW
Power consumption at 7 °C / 35 °C water temperature: 1.50 kW
COP at 7 °C / 35 °C water temperature: 5.35
Heating capacity at 7 °C outdoor / 55 °C water temperature: 8.00 kW
Power consumption at 7 °C / 55 °C water temperature: 2.35 kW
COP at 7 °C / 55 °C water temperature: 3.40
SCOP at 35 °C: 5.20
SCOP at 55 °C: 3.85
Energy class: A+++ at 35 °C / A+++ at 55 °C
Refrigerant: R290
Power supply: 1 × 230 V / 50 Hz
COP and SCOP values are based on the manufacturer's standardised test conditions. Actual performance depends on factors including outdoor temperature, water flow temperature, system sizing, and operating conditions.
Haier AW082HUGHA outdoor unit
The AW082HUGHA outdoor unit recovers heat from the outdoor air and transfers it to the system's hydraulic circuit.
-
Model: AW082HUGHA
-
Nominal heating capacity: 8 kW
-
Technology: DC Inverter
-
Compressor: dual DC rotary
-
Refrigerant: R290
-
Power supply: 1 × 230 V / 50 Hz
-
Heating operating range: -25 to +35 °C
-
Cooling operating range: 10 to +48 °C
-
Maximum water outlet temperature: up to 80 °C
-
Hydraulic connections: R1 / R1
-
Dimensions: approximately 1250 × 790 × 380 mm
The HP KEYMARK certification for the AW082HUGHA + HU102F20AHYA system confirms a heating capacity of 8 kW, with an outdoor sound power level of 59 dB(A) at low temperature and 64 dB(A) at medium temperature.
Haier HU102F20AHYA indoor unit
The HU102F20AHYA indoor unit forms the system's hydraulic and hot water core. It features a built-in 200-litre hot water tank.
-
Model: HU102F20AHYA
-
Type: Hydro All-In-One indoor unit
-
Integrated hot water tank: 200 litres
-
Power supply: 230 V / 50 Hz
-
Expansion vessel: integrated
-
Circulation pump: integrated
-
Flow sensor: integrated
-
Heating connections: R1 / R1
-
Hot water connection: R3/4"
-
Dimensions: approximately 590 × 590 × 1780 mm
The manufacturer states that the expansion vessel, flow sensor and pump are integrated into the All-In-One unit. The indoor and outdoor units are connected by a 2-wire communication cable.
Integrated 200-litre hot water tank
The indoor unit features a 200-litre hot water tank, providing heating and hot water in a single column.
This configuration is particularly suitable for compact installations with a limited number of separate pieces of equipment. The HP KEYMARK certification confirms that the system is suitable for heating and hot water production.
Hot water tank capacity: 200 L
Application: heating + hot water
System type: Hydro All-In-One
Tank: integrated into the indoor unit
Heating, cooling and year-round comfort
The Haier Hydro All-In-One R290 8 kW is a reversible solution that can provide heating in winter and cooling when required.
In heating mode, the water outlet temperature can reach up to 80 °C, depending on operating conditions. In cooling mode, the water outlet temperature can be set from 5 to 25 °C.
The outdoor reset function automatically adjusts the water temperature based on the outdoor temperature to improve comfort and energy efficiency.
A solution suitable for various heating emitters
The heat pump can be used with various hydraulic systems, including underfloor heating, low-temperature radiators and some high-temperature radiators, provided the system is sized appropriately.
The water flow temperature should be selected based on the heating emitters in the building. The lower the required water temperature, the more favourable the conditions generally are for heat pump efficiency.
Package contents
-
1 × Haier AW082HUGHA outdoor unit – 8 kW
-
1 × Haier HU102F20AHYA indoor unit – Hydro All-In-One
-
1 × integrated 200 L hot water tank
-
1 × buffer tank included in the kit
-
1 × heating expansion vessel with console
-
1 × return pump
-
1 × union fitting with disconnect
-
1 × programmable wireless radio thermostat
-
1 × emergency disconnect switch
-
1 × set of Rubber Foot anti-vibration mounts
The EcoNégoce product sheet also lists an Atlantic Chaufféo 200 L electric water heater as part of the package. However, the Haier Hydro All-In-One AW082HUGHA + HU102F20AHYA configuration already includes a 200-litre hot water tank built into the indoor unit. The exact contents of the bundle should be checked when preparing the order to confirm whether an additional Atlantic tank is actually included.
Key features
Brand: Haier
Range: Hydro All-In-One R290
Type: air/water heat pump
Design: Hydro All-In-One
Capacity: 8 kW
Outdoor unit: AW082HUGHA
Indoor unit: HU102F20AHYA
Hot water tank: integrated 200 L
Refrigerant: R290
Power supply: 1 × 230 V / 50 Hz
COP at 7 °C / 35 °C: 5.35
COP at 7 °C / 55 °C: 3.40
SCOP at 35 °C: 5.20
SCOP at 55 °C: 3.85
Energy class: A+++ / A+++
Maximum water outlet temperature: up to 80 °C
Functions: heating, cooling and hot water
Installation and commissioning
A heat pump using R290 must be installed in accordance with the manufacturer's instructions and the regulations applicable to equipment using this refrigerant.
The heat pump capacity, hydraulic system, buffer tank and emitters must be sized appropriately for the building's thermal characteristics.
Commissioning, settings and controls must be carried out in accordance with Haier's recommendations and current regulations by a qualified professional.
Important: the Haier Hydro All-In-One system already includes a 200-litre hot water tank built into the HU102F20AHYA indoor unit. The exact configuration and contents of the accessory kit must be checked before installation to ensure compliance with the hydraulic diagram and the manufacturer's recommendations.
