Complete Haier R290 Split 8 kW single-phase air/water heat pump pack, with indoor hydraulic module, Atlantic Chaufféo 200 L electric water heater and accessory kit for a complete installation.
This two-block solution uses the natural R290 refrigerant and combines energy efficiency, high water temperature and versatility to meet heating, cooling and domestic hot water production needs.
A complete solution for heating and domestic hot water
The Haier R290 Split 8 kW pack is designed for renovation projects as well as new builds seeking an efficient and energy-saving heating solution.
Its two-block architecture separates the outdoor unit from the indoor hydraulic module. The heat pump recovers the calories naturally present in the outdoor air to heat the water in the heating circuit. The system can also operate in cooling mode and contribute to domestic hot water production thanks to the Atlantic Chaufféo 200-litre electric water heater included in the pack.
The Haier system uses R290, a natural refrigerant with a very low global warming potential, and benefits from Inverter technology allowing the operating power to be adapted to the building's needs.
The highlights of the Haier R290 8 kW pack
-
8 kW nominal heating power
-
Split two-block technology with separate outdoor unit and indoor hydraulic module
-
R290 refrigerant, natural and with low environmental impact
-
Energy class A+++ for heating at 35 °C and 55 °C
-
COP up to 5.18 depending on operating conditions
-
SCOP up to 5.25 at low temperature according to manufacturer data
- Heating and cooling operation
-
Water flow temperature up to 85 °C depending on conditions and operating mode
-
Heating operation down to -30 °C outdoor temperature
- 220-240 V / 50 Hz single-phase power supply
- Hydraulic module equipped with an 8-litre expansion vessel
- Integrated 3 kW electric auxiliary heater
-
Atlantic Chaufféo 200 L domestic hot water tank included
- Accessory kit including buffer tank, expansion vessel, circulator, thermostat and safety devices
A heat pump suited for renovation
Thanks to its ability to produce high-temperature heating water, the Haier R290 Split 8 kW heat pump can be integrated into various residential projects, particularly when replacing an old heating system.
It can notably be combined with water radiators or low-temperature heating systems such as underfloor heating, subject to the sizing and hydraulic configuration of the installation.
Inverter technology allows the heat pump to adjust its operation according to needs, promoting more stable operation and better control of electricity consumption.
R290 technology: performance and energy transition
R290 (propane) is a natural refrigerant used in new generations of heat pumps. Its very low global warming potential makes it a particularly interesting solution in the context of evolving European regulations on refrigerants.
Combined with Inverter technology and optimized operation at different water temperatures, the Haier system allows for a good compromise between thermal comfort, energy efficiency and consumption control.
Technical performance
Heating power at 7 °C outdoor / 35 °C water: 8 kW
Power consumption at 7 °C / 35 °C water: approximately 1.62 kW
COP at 7 °C / 35 °C water: up to 5.18 according to manufacturer data
Heating power at 7 °C outdoor / 55 °C water: 8 kW
Power consumption at 7 °C / 55 °C water: approximately 2.35 kW
COP at 7 °C / 55 °C water: up to 3.54 depending on measurement conditions
SCOP at 35 °C: up to 5.25
SCOP at 55 °C: up to 4.17
Energy class: A+++ at 35 °C / A+++ at 55 °C
Refrigerant: R290
Power supply: 220-240 V / 50 Hz single-phase
COP and SCOP performance vary depending on outdoor and water temperature conditions. The indicated values correspond to the manufacturer's measurement conditions and do not constitute a fixed electricity consumption.
Haier HPM08-ND2-H outdoor unit
The HPM08-ND2-H outdoor unit forms the thermodynamic heart of the system. It recovers calories from the outdoor air and transfers them to the hydraulic circuit via the indoor module.
-
Model: HPM08-ND2-H
-
Nominal heating power: 8 kW
-
Power supply: 220-240 V / 50 Hz single-phase
-
Refrigerant: R290
-
Compressor: DC Inverter technology
-
Heating operating range: approximately -30 to +35 °C
-
Cooling operating range: approximately 10 to +50 °C
-
Heating water temperature: up to 85 °C depending on operating conditions
-
Indicative dimensions: 1272 × 534 × 822 mm
Haier HPM06(12)-ND2-WW1 indoor hydraulic module
The HPM06(12)-ND2-WW1 indoor hydraulic module groups the main hydraulic and control elements required for the heat pump's operation. Its power range allows it to be combined with different outdoor units in the range.
-
Model: HPM06(12)-ND2-WW1
-
Power supply: 220-240 V / 50 Hz
-
Integrated expansion vessel: 8 L
-
Electric auxiliary heater: 3 kW
-
Pump maximum head: approximately 9 m
-
Display: TFT screen
-
Dimensions: approximately 500 × 887 × 309 mm
The hydraulic module ensures the circulation of water and the management of the installation's various operating parameters. It is connected to the outdoor unit by the Split system's refrigeration circuit and by the connections necessary for control.
Atlantic Chaufféo 200 L electric water heater
The pack also includes an Atlantic Chaufféo 200-litre electric water heater intended to ensure the production of domestic hot water for the home.
It is a domestic hot water tank separate from the heat pump. This configuration provides a complete solution combining heat pump heating and domestic hot water production.
Pack contents
-
1 × Haier HPM06(12)-ND2-WW1 indoor unit
-
1 × Haier HPM08-ND2-H outdoor unit – 8 kW
-
1 × magnetic sludge trap with Ø1" shut-off valves
-
1 × Ø3/4" FF CA573 disconnecter
-
1 × Rubber Foot anti-vibration support
-
1 × Ecoya P.110.88 PWM Ø1"1/2 male circulator
-
1 × Ø1" F × 1"1/2 circulator union fitting
-
1 × 25 L heating expansion vessel
-
1 × console equipped for heating expansion vessel
-
1 × T3R programmable wireless radio thermostat
-
1 × emergency button with 4P 32A single/three-phase disconnect switch
-
1 × 50 L buffer tank with 4 connections
-
2 × 1" male anti-freeze valves
-
1 × Atlantic Chaufféo 200 L electric water heater
50 L buffer tank included
The 50-litre buffer tank included in the kit helps improve the hydraulic stability of the installation and promotes the proper operation of the heating circuit.
Its inclusion in the pack simplifies the assembly of the installation by grouping several elements required for the hydraulic installation.
An accessory kit designed for a complete installation
The pack is not limited to the heat pump and the domestic hot water tank. It also includes several hydraulic, electrical and control components allowing you to have a complete base for the installation.
-
Hydraulic protection: magnetic sludge trap and disconnecter
-
Hydraulic stability: 50 L buffer tank
-
Expansion: 25 L heating expansion vessel with console
-
Circulation: PWM circulator
-
Control: T3R programmable radio thermostat
-
Electrical protection: emergency disconnect switch
-
Freeze protection: two anti-freeze valves
-
Outdoor installation: Rubber Foot anti-vibration supports
Main features
Brand: Haier
Range: R290 Split
Type: Two-block air/water heat pump
Power: 8 kW
Power supply: 220-240 V / 50 Hz single-phase
Refrigerant: R290
Energy class: A+++ at 35 °C / A+++ at 55 °C
Maximum water temperature: up to 85 °C depending on operating conditions
Functions: heating, cooling and domestic hot water production via the dedicated tank
Domestic hot water tank: Atlantic Chaufféo 200 L
Buffer tank: 50 L
Electric auxiliary heater: 3 kW
Expansion vessel integrated into the hydraulic module: 8 L
Heating expansion vessel included in the kit: 25 L
Installation and commissioning
A heat pump using R290 must be installed in accordance with the manufacturer's specifications and the rules applicable to installations using this refrigerant.
The sizing of the heat pump, buffer tank, heating emitters and hydraulic network must be carried out according to the characteristics of the home and the thermal needs.
The commissioning and controls of the installation must be carried out by a qualified professional, in accordance with Haier's recommendations and current regulations.
Important: the pack includes several distinct pieces of equipment. The Haier indoor hydraulic module, the Haier outdoor unit, the buffer tank and the Atlantic Chaufféo 200 L water heater are separate elements that must be installed and connected in accordance with the hydraulic diagram and the manufacturers' recommendations.
